No thread and a little shard of brass left over from the slot milling
Patient 0069
July 31, 2007
Leave a Comment » | 
Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 5/8", Screw Size - 4 | 
Permalink
Posted by screwasylum
Patient 0068
July 24, 2007
Heavy pressing has left the head with a slightly extended overhang and a non-parallel slot…and you thought you had seen them all!
Leave a Comment » | 
Defect - Head, Drive - Slotted, Head - Countersink, Material - Steel/Alloy, Screw Length - 1 1/2", Screw Size - 10 | 
Permalink
Posted by screwasylum
Patient 0067
July 18, 2007
A screw needs a point or it’s just a bolt isn’t it?
2 Comments | 
Defect - Shaft, Drive - Slotted, Material - Brass, Screw Length - 1/2", Screw Size - 4 | 
Permalink
Posted by screwasylum
Patient 0066
July 16, 2007
Do I have to keep explaining?
Leave a Comment » | Defect - Shaft, Drive - Slotted, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Solid Freeform Fabricated Sugar Screw
July 14, 2007Brent popped by to let us know about this solid freeform fabricated sugar screw.
Of course, the direct media cost in the models can also be an important consideration. Consider this model of a wood screw that we fabricated out of sugar: It’s 20 inches long, with the head diameter of 4.5 inches, and it weighs about 2.5 pounds, so the total media cost is about $0.93.
Leave a Comment » | Misc Screwismness | Permalink
Posted by screwasylum
Patient 0065
July 13, 2007
A nice little milled out notch at the tip of the screw
Leave a Comment » | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Screw Drive 1970s Russian Vehicle
July 10, 2007I’ve just found the official Screw Asylum holiday coach. Take a look at these videos of a 1970s Russian all terrain vehicle. Pretty cool hey?
5 Comments | Misc Screwismness | Permalink
Posted by screwasylum
Patient 0064
July 7, 2007
No thread and a shallow off-centred slot
Leave a Comment » | Defect - Head, Defect - Multi, Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 3/4", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0063
July 3, 2007
No thread
Leave a Comment » | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 2 1/2", Screw Size - 8 | Permalink
Posted by screwasylum
