No thread and a little shard of brass left over from the slot milling
Patient 0069
July 31, 2007
Leave a Comment » | 
Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 5/8", Screw Size - 4 | 
Permalink
Posted by screwasylum
Patient 0067
July 18, 2007
A screw needs a point or it’s just a bolt isn’t it?
4 Comments | Defect - Shaft, Drive - Slotted, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0066
July 16, 2007
Do I have to keep explaining?
Leave a Comment » | Defect - Shaft, Drive - Slotted, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0065
July 13, 2007
A nice little milled out notch at the tip of the screw
Leave a Comment » | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0064
July 7, 2007
No thread and a shallow off-centred slot
Leave a Comment » | Defect - Head, Defect - Multi, Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 3/4", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0059
June 15, 2007
shredded shaft
1 Comment | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Steel/Alloy, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0055
May 31, 2007
Check out the reduced diameter on the shaft where the thread should have been
Leave a Comment » | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 3/4", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0050
May 20, 2007
Half and inch of brass with no thread and a gnarly countersink
1 Comment | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0021
April 1, 2007
A 1/2″ brass screw without a thread
Leave a Comment » | Defect - Shaft, Drive - Slotted, Head - Countersink, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
Patient 0018
March 26, 2007
A (strangely off centred photo of a) half inch roundhead with no thread
Leave a Comment » | Defect - Shaft, Drive - Slotted, Head - Roundhead, Material - Brass, Screw Length - 1/2", Screw Size - 4 | Permalink
Posted by screwasylum
screwasylum.wordpress.com 